Fast Next Working Day Delivery
Bulk Discounts Available
Order Pre 2pm for Delivery EcoPro Wall Insulation Kit
EcoPro Wall Insulation Kit
EcoPro Wall Insulation Kit
Did you know uninsulated walls allow 35% of heat energy to escape? This means for every £1.00 spent £0.35 is wasted (in some cases much more). This is why Multifoils Direct have created a EcoPro Wall Insulation Kit – which is an easy to install, highly effective insulation solution.
How does this work?
The EcoPro Wall Insulation Kit reflects heat back in to your home and the cold away from your home. In the peak of summer, it also works to keep your home ambient by reflecting excess, unwanted heat away.
The insulation within this kit is called EcoQuilt Expert, it is a 6 layer multifoil insulation with highly reflective outer layers and wadding! This means it slows down the rate in which energy can enter and escape – thus saving energy and subsequently money.
When Taped and Sealed with our Thermaseal Foil Joining Tape, then you also benefit from a vapour control layer – so moisture cannot enter, which could otherwise create mould.
What is Included within the EcoPro Wall Insulation Kit?
- EcoQuilt Expert 1.5 x 10m (6-layer foil insulation blanket)
- Thermaseal Foil Joining Tape
- 1 x Heavy Duty Staple Gun Kit
- 5,000 x 14mm Staples
- Multifoil Insulation Screws
- 1 x Multifoil Insulation Scissors
- Next Working Day Delivery, if ordered before 2pm
Where can you install the Wall Insulation?
You can install this insulation kit on timber frame walls, cavity walls, solid walls and even on the exterior of walls.
If you would like our teams assistance in working out how many kits you will require? Use our Call Me Back request now, and our team will call you within the hour! (Monday-Friday before 5 pm)
FREE GIFT
Spend £500 + VAT and Choose a FREE GIFT at the checkout!
Free Gifts Include Thermaseal Foil Joining Tape, Heavy Duty Staple Gun Kit, Multifoil Insulation Scissors or Thermaseal Double Sided Tape.
| Length | 10m |
| Width | 1.5m |
| Thickness | 15mm (5mm Compressed) |
| Roll Coverage | 15m² |
| Layers | 6 |
| Weight | 5.5KG |
| Core R-value | 0.93m²K/W |
| Roof R-value | 1.83m²K/W |
| Floor R-value | up to 5.56m²K/W |
| Foil Emissivity | 0.05 |
| Water Vapour Resistance | 600MNs/g |
Do I need to tape and seal the insulation?
Yes, we recommend taping and sealing over all joints and overlaps on the roof and walls. This will help the products to act as a high-performing vapor control layer.
Why do I need to overlap the insulation?
The insulation should be overlapped by 50mm because this will stop draughts from entering the space and warm air from escaping.
Do I need to leave an air gap?
Yes, the minimum air gap we recommend is 25mm on either side of the insulation however if a larger air gap is present this will only benefit the insulation. The air gap will help reflect any heat inside and any cool air outside.
Where can I install this?
Timber Frame walls, cavity walls, solid walls, and also the exterior of walls.
There are no reviews yet.