Fast Next Working Day Delivery
Bulk Discounts Available
Order Pre 2pm for Delivery How To Install EcoQuilt Expert on Roofs and Walls
EcoQuilt Expert is a 6 Layer High Performance Multifoil Insulation Blanket designed to insulate Roofs, Walls, Floors, Conservatories and many more.
EcoQuilt Expert is the highest performing multifoil when measuring cost vs performance.
For more in-depth information see the specific application for roofs/walls etc.
SuperQuilt-Insulation are the leading UK & European distributor of Multifoil Insulation products. We offer fast next working day delivery to the UK Mainland (Order before 2pm)
view_day Insulation Materials
build Tools
Method Steps
-
Measure Area and Cut EcoQuilt
Begin by rolling out and cutting the insulation to size. EcoQuilt can be installed either horizontally or vertically Cut EcoQuilt Expert either using Multifoil Scissors or a Cutting Knife
-
Staple Insulation to Timber
To gain the best thermal benefits, a cavity either side of the insulation is required. Staple EcoQuilt directly on to timbers (Rafters, Studs, Battens) at 300mm intervals Tip - It is helpful for an additional person to be holding the insulation, whilst the other staples
-
Tape and Seal EcoQuilt
EcoQuilt Expert is to be overlapped by a min 50mm, over all overlaps. Ensure these are fully taped and sealed using Thermaseal Foil Joining Tape. Once EcoQuilt is fully taped and sealed, the product will work as a high performance Vapour Control Layer, reducing condensation. Ensure EcoQuilt is also taped and sealed around the perimeter.
-
Counter Batten & Plasterboard
Finish the installation by installing by screwing 25mm battens over the insulation. Battens are usually spaced between 400mm and 600mm centres. Then install your internal finish over the battens.
Disclaimer – SuperQuilt-Insulation cannot be held responsible for any losses financially or physically from advice provided in this How-To-Guide.
